Deck Resurfacing

Keep the frame. Replace everything you walk on and hold onto.

Get a Free Quote

Composite Deck Resurfacing for Michigan Homeowners

Is your deck looking worse for wear? Peeling stain, splintering boards, a railing that wobbles when you lean on it — but a frame that still feels solid underfoot. That is the deck resurfacing candidate. Instead of tearing everything out and starting over, Custom Deck Creations removes the old deck boards and railing, keeps the structure, and rebuilds the surface in Trex composite decking — so you get a new deck without paying for a new frame.

What Is Composite Deck Resurfacing?

Worn wood deck before resurfacing
Before

Traditional wood decks need constant upkeep and eventually the boards give out — but the boards usually fail long before the framing does. Deck resurfacing (also called re-decking or deck refacing) means installing new decking, railing and stairs on your existing frame. It is faster than a full rebuild and, because the framing and footings stay, it costs less.

Resurfacing is only worth doing on a frame that will outlast the new boards — so every resurfacing project starts with a framing inspection. We check the ledger, joists, beams, posts and footings for rot, movement and code issues before we quote anything. If the frame passes, we resurface it in Trex. If it does not, we will tell you plainly and price a new deck instead — putting a 25-year decking board on a 10-year frame is a bad deal for you, and we won’t do it. Not sure which one you need? Six questions to ask before you resurface an existing deck.

Benefits of Trex Deck Resurfacing

Unlike wood, Trex composite decking isn’t vulnerable to rot or insects, and it resists staining, fading and splintering. Once installed, the scraping, painting and staining stop for good — a hose-down is the maintenance. And the durability comes without giving up looks: Trex has natural woodgrain patterns in a wide range of colors, and we finish every resurfaced deck the same way we build a new one — hidden fasteners with zero visible face screws, waterproofing tape on every joist and beam, and new black aluminum railing.

Same deck after resurfacing with Trex composite decking and new railing
After

As a multi-award winning deck builder and TrexPro Platinum installer, Custom Deck Creations is Michigan’s most trusted deck builder — 1,000+ decks since 2017, rated 4.9★ on Google by hundreds of homeowners. Our Design Consultants bring physical samples to your kitchen table, you approve a 3D design before anything is ordered, and the owner personally manages every job. Every resurfacing project is backed by our Lifetime Transferable Workmanship & Materials Warranty, Trex’s 25-year manufacturer warranty, and our No-Surprise Costs Guarantee — the price you sign is the price you pay.

Find out if deck resurfacing is right for you. Request a free in-home consultation — a NADRA-certified deck inspector checks the frame with you, shows you samples, and gives you a firm price for resurfacing or a rebuild, whichever your deck actually needs. Or call (734) 931-6700.

BUILD WITH CONFIDENCE -

Let Us Know About Your Project

TrexPro Platinum Logo

Featured on Trex.com

Custom Deck Creations is a multi-award winning Trex designer and builder and TrexPro Platinum Dealer. No other deck contractor in southeast Michigan has a better reputation.

The Deck Resurfacing Process

NADRA certification badge 2025 - 2028
Deck inspector checking a deck frame with the homeowners
01

Free consultation with a NADRA-certified deck inspector

We come to your home and inspect the framing with you — ledger, joists, beams, posts and footings — and show you everything we find as we find it. You get an open, honest answer on the spot: resurface, or rebuild. No pressure either way.

Design Consultant reviewing a 3D deck design with homeowners
02

Design your new deck

Pick your Trex color and railing from physical samples at your kitchen table, add the options you want — lighting, a picture-frame border, wider stairs — and approve a 3D design before anything is ordered. Your price is locked in with our No-Surprise Costs Guarantee.

Exploring the Building Process
03

Schedule the resurface

We pull the permit, take off the old boards and railing, and build your new Trex surface on the frame you already have — hidden fasteners, waterproofed joists, new railing and stairs. Most resurfacing projects are finished in one to three weeks, depending on the size of the project, weather, and inspections.

Deck Resurfacing Questions

Can my deck be resurfaced?
If the frame is sound, usually yes. Deck boards and railings wear out long before the framing does, so a deck that looks tired on top can have plenty of life underneath. The only way to know is an inspection — we check the ledger, joists, beams, posts and footings, and tell you plainly which side of the line your deck is on.

Why does the frame matter so much for composite?
Weight. Trex composite decking is heavy — a standard 1″×6″ Trex board weighs about 2.5 pounds per foot, versus about 0.9 for cedar — roughly two and a half times heavier than wood. A frame that carried wood boards for 20 years is not automatically able to carry composite: an undersized or tired frame will start to sag, and in the worst case it can collapse. The frame also has to last as long as the new surface, and Trex boards carry a 25- to 50-year manufacturer warranty.

How old is too old to resurface?
A pressure-treated wood frame typically lasts 20 to 40 years. If your deck is 15 years old or more, resurfacing rarely makes sense — you would be putting a 25-year board on a frame with far less than that left. Age is not the deciding factor, but it is a strong hint; the inspection settles it.

What turns a resurface into a full rebuild?
The usual reasons: a ledger board attached with nails or installed without flashing (the number one cause of deck collapses); posts that are not anchored below Michigan’s 42-inch frost line, or sitting on or in the ground and rotting at the base; rot in joists or beams; and any change to the layout — a second tier, a bigger footprint, a hot tub, a pergola, an outdoor kitchen or a different railing design almost always means a new frame. Six questions to ask before you resurface an existing deck.

What if you find rot after you start?
It happens — framing can be concealed by skirting or a deck built low to the ground, so a visual inspection cannot see everything. That is why we quote the worst case up front: the resurfacing price and the full cost to replace the frame if we find damage once the boards come off. No surprises, and you and we decide together how to move forward.

Do I need a permit to resurface a deck?
Usually, yes — in most Michigan communities, deck work over about $600 requires a permit. And more often than not, the railings and stairs need to be replaced anyway: older build methods, railings that do not meet current code, or a deck that never had a permit pulled in the first place. Having a permit on file is ideal for many reasons, including when you sell the house. We pull it for you and schedule the inspections.

CUSTOMER REVIEWS

Our Customers Love Us!

Custom Deck Creations has a track record of excellence in everything we do, and it shows in our outstanding reviews. We provide superior designs, advanced composite decking, customer-focused service, and detail-oriented deck installations.
EXCELLENT
Google star 1Google star 2Google star 3Google star 4Google star 5
Based on 402 reviews
Posted on Google Google
Jeffery Schenk profile picture
Jeffery Schenk
9 November 2026
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I love sitting on the porch on those nice days
Posted on Google Google
Bill Annand profile picture
Bill Annand
4 November 2026
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
+3
Great Company to deal with. Working with Bryan as my salesman was very helpful planning out the design of my deck. He was able to show me digital drawings of the design and modify those as I requested. When Lloyd and Alex came out to do the work they were very helpful and able to make changes from the original drawing to put the ladder area where I wanted it. Dealing with this company has been a very good experience that I would recommend to others looking for a new deck.
Posted on Google Google
Jeni Barry profile picture
Jeni Barry
21 October 2026
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Had a lovely experience with Custom Deck Creations and I LOVE my new front porch! From Tyler in sales & design, to Eric the builder, to Bryan, the project manager who just came out to do a final walkthrough to make sure I was truly satisfied. Even with a few hiccups from the lumberyard, they remained positive and professional! Highly recommended!!!
Posted on Google Google
Celia Jackson profile picture
Celia Jackson
20 October 2026
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
+0
Great experience working with Custom Deck Creations. It was totally effortless for us on the homeowner side. They set clear expectations on timelines and process and provided the plenty of written and video information. We are super happy with our deck and so are our dogs. 10/10!
Verified by Trustindex
Trustindex verified badge is the Universal Symbol of Trust. Only the greatest companies can get the verified badge who has a review score above 4.5, based on customer reviews over the past 12 months. Read more